Auto Tune Satellite Dish

Offset dishes may appear to be pointed low towards the horizon, when in fact they are aiming at a much high elevation as shown in the above diagram.

Getting Started

Satellite auto

If you've never aligned a dish before, it can be very frustrating, especially if you don't have a signal meter of some sort. You may well end up thinking the receiver is faulty. Digital channels are either 'on' or 'off' and do not fade in or out gradually like analogue signals, further adding to the difficulty. Waving a dish about in the deluded hope that you will somehow find the correct location without either setting the elevation angle or knowing the azimuth angle is a complete and utter waste of time. However, if you follow the steps outlined below you will succeed ... eventually!

1. Attach the F-connectors - Make sure that the cable and F-connectors are properly fitted. The inner core of the coax cable and the outer braid must never come in contact with each other.

  1. Sign into your MyDISH account or create a new one. With an online account on mydish.com, you can view and pay your bill, change your programming, keep.
  2. Aug 30, 2017 How to auto tune any channel how to tune channel in dish TV how to search channel in dish TV how to add channel in dish TV how to search channel in dish tv. How to set auto tune channel in dist.

Auto Tune Satellite Dish Service

2. Set the elevation angle - For the majority of novice satellite users, the satellite they wish to align to is the Astra2/Eurobird cluster at 28 degrees east. This is where Sky, BBC, ITV and C4 are transmitted from. For Ireland, the dish elevation for Astra2 is approximately 22 degrees.

Oct 07, 2015 Part 5 of 5 Self Installation of a Satellite TV Dish System From A to Z Searching and using sat - Duration: 11:32. Amadou Keita 10,134 views. This satellite dish tripod is made of heavy duty galvanized steel and comes with a 28' mast. This satellite dish tripod works great where no drilling and permanent mounting is permitted. The Wally will take a few minutes to reset, then display the “Acquiring Satellite Signal” message, download the program guide, and return to DISH programming. Page 58. Red – A weak, unacceptable signal that may be from the wrong satellite transponder or orbital location Other Help Resources. Access information about your Wally.

Satellite Dish Antenna

Most offset dishes have an elevation scale on the mounting bracket which allows you to adjust the dish to the correct elevation.


For satellites other than Astra2, a list of approximate elevation angles is provided.

Dish Wally Auto Tune

3. Tune your receiver - If you don't have a signal meter, you will have to use your receiver's on-screen meter. Firstly, make sure you are tuned to an active channel or transponder and that all the parameters are correct - Frequency 10.774GHz, Symbol Rate 22000, Polarisation Horizontal, (FEC Auto or 5/6) is suitable for the BBC channels on Astra2.

Auto Tune Satellite Dish Network

You may have to enter the Setup/Installation menu in order to have a constant display of the meter.